Home page

CHNT POWGRID-S DISTRIBUTION CABINET

Category:

Brand authorized cabinet

Email:

cy83207718@163.com

General description:

The POWGRID-S series low-voltage distribution and control boxes are a new low-voltage complete product developed by Chint Electric for the domestic distribution market. The standardized product design, unified brand image, and comprehensive enhancement of customer experience all stem from the original intention of creating value for customers.

Product Overview

The POWGRID-S series low-voltage distribution and control box is a newly developed low-voltage complete product by Chint Electric for the domestic distribution market. The standardized product design, unified brand image, and comprehensive customer experience enhancement all stem from the original intention of creating value for customers.

The POWGRID-S series low-voltage distribution and control box complies with GB7251.1-2013 and GB7251.12-2013 standards. It can be applied in various scenarios such as power distribution, motor control, and lighting control. It offers different installation methods including wall-mounted surface installation, wall-mounted concealed installation, and floor installation. It also meets the requirements for both indoor and outdoor installation.

The POWGRID-S series low-voltage distribution and control box is assembled using high-quality cold-rolled steel or stainless steel (according to customer requirements) through welding, featuring a user-friendly design, reasonable structural layout, and a novel and beautiful appearance.

Product Application Industries

The POWGRID-S series low-voltage distribution and control box can be widely used in commercial buildings, residential housing, infrastructure, rail transit, steel mining, industrial plants, petrochemicals, railway ports, etc., serving as distribution and control equipment for power distribution, area lighting, and motor control in low-voltage distribution systems.

Product Features

Door Limit Mechanism

When the box door is opened, the door limit mechanism can effectively prevent the door from colliding and disturbing the operation and maintenance personnel.

Door Lighting

Convenient for maintenance in poorly lit environments without the need for additional lighting.

Folder

The inside of the box door is equipped with a folder for storing product drawings, samples, technical materials, and other documents for easy access.

Transport Base

Optional transport base for easy transportation on-site without lifting equipment.

Foam Sealing

Using a one-time molded foam sealing process, compared to traditional sealing strips, it has higher elasticity, no seams, better sealing performance, and can achieve true IP54.

Pre-drilled Installation Holes

The installation brackets and beams with pre-drilled holes facilitate the positioning and adjustment of components and securing cables.

Working Environment Conditions

Operating Environment

Minimum Temperature: -5℃

Short-term Maximum Temperature: 40℃

Maximum Average Temperature over 24 hours: 35℃

If the equipment is used in temperatures above the above conditions, derating should be considered.

Environmental Conditions

Relative Humidity: ≤50% (+40°C)

Higher humidity is allowed at lower temperatures, up to 90% (+20℃)

If the equipment is installed at an altitude above 2000 meters, derating operation should be considered.

Transport Temperature

Normal Temperature: -25℃ ~ 55℃

Short-term (not exceeding 24 hours): 70°C

Product Technical Parameters

Compliance Standards	Passed Type Test (TTA)	GB 7251.1-2013
		GB 7251.4-2017
		GB 7251.12-2013
Electrical Parameters	Rated Working Voltage (Ue)	230V/400VAC
	Rated Insulation Voltage (Ui)	Up to 1000V (depending on components)
	Rated Impulse Withstand Voltage (Uimp)	6/8kV (depending on components)
	Overvoltage Category	III
	Rated Frequency	50Hz
	Pollution Level	III
	Rated Current (le)	Up to 630A
	Rated Short-time Withstand Current (Icw)	Up to 30kA
	Rated Peak Withstand Current (Ipk)	Up to 63kA
Structural Characteristics	Protection Level	IP40/54
	Surface Treatment	Epoxy resin electrostatic powder coating with matte finish
	Appearance Color	RAL7035 or as per customer requirements
	Box Structure	Welded
	Installation Method	Wall-mounted surface installation, wall-mounted concealed installation, floor installation
	Installation Location	Indoor installation, outdoor installation
Material Specifications	Sealing Material	Polyurethane one-time foaming
	Shell	Wall-mounted: 1.2mm cold-rolled steel/stainless steel
		Floor-mounted: 1.5mm cold-rolled steel/stainless steel
	Door Panel	Wall-mounted: 1.5mm cold-rolled steel plate/stainless steel plate
		Floor-standing: 2mm cold-rolled steel plate/stainless steel plate
	Installation board	1.5mm aluminum-zinc coated plate
	Insulation parts	Made of self-extinguishing or flame-retardant thermoplastic materials